This project builds virtual machine which can be used for analytics of tshark -T ek (ndjson) output. The virtual appliance is built using vagrant, which builds Debian 10 with pre-installed and pre-configured ELK stack.

After the VM is up, the process is simple:


Instuctions to build VM from Ubuntu desktop

Clone source code

git clone https://github.com/H21lab/tsharkVM.git

Build tshark VM
virtualbox vagrant bash ./build.sh “>

sudo apt update
sudo apt install tshark virtualbox vagrant
bash ./build.sh

Upload pcaps to VM

# copy your pcaps into ./Trace
# run following script
bash upload_pcaps.sh

# or use tshark directly towards 127.0.0.1 17570/tcp
tshark -r trace.pcapng -x -T ek > /dev/tcp/localhost/17570

Open Kibana with browser

firefox http://127.0.0.1:15601/app/kibana#/dashboards

Open Main Dashboard and increase time window to e.g. last 100 years to see there the sample pcaps.

 

  
SSH to VM

cd ./VM
vagrant ssh

Delete VM

cd ./VM
vagrant destroy default

Start VM

cd ./VM
vagrant up

Stop VM

cd ./VM
vagrant halt

SSH into VM and check if ELK is running correctly

cd ./VM
vagrant ssh
sudo systemctl status kibana.service
sudo systemctl status elasticsearch.service
sudo systemctl status logstash.service

Elasticsearch mapping template

In the project is included simple Elasticseacrh mapping template generated for the frame,eth,ip,udp,tcp,dhcp protocols. To handle additional protocols efficiently it can be required to update the mapping template in the following way:Elasticsearch version ruby ./Public/process_tshark_mapping_json.rb # 3. Upload file to vagrant VM cd VM vagrant upload ../Kibana/custom_tshark_mapping_deduplicated.json /home/vagrant/tsharkVM/Kibana/custom_tshark_mapping_deduplicated.json cd .. # 4. Connect to VM and upload template in the Elasticsearch cd VM vagrant ssh cd tsharkVM/Kibana curl -X PUT “localhost:9200/_index_template/packets_template” -H ‘Content-Type: application/json’ -d@custom_tshark_mapping_deduplicated.json “>

# 1. Create custom mapping, by selecting required protocols
tshark -G elastic-mapping --elastic-mapping-filter frame,eth,ip,udp,tcp,dns > ./Kibana/custom_tshark_mapping.json

# 2. Deduplicate and post-process the mapping to fit current Elasticsearch version
ruby ./Public/process_tshark_mapping_json.rb

# 3. Upload file to vagrant VM
cd VM
vagrant upload ../Kibana/custom_tshark_mapping_deduplicated.json /home/vagrant/tsharkVM/Kibana/custom_tshark_mapping_deduplicated.json
cd ..

# 4. Connect to VM and upload template in the Elasticsearch
cd VM
vagrant ssh
cd tsharkVM/Kibana
curl -X PUT "localhost:9200/_index_template/packets_template" -H 'Content-Type: application/json' -d@custom_tshark_mapping_deduplicated.json

Alternative can be using the dynamic mapping. See template ./Kibana/template_tshark_mapping_dynamic.json. And consider setting the numeric_detection parameter true/false depending on the mapping requirements and pcaps used. Upload the template into Elasticsearch in similar way as described above.
Limitations

tshark -G elastic-mapping –elastic-mapping-filter mapping could be outdated, it is not following properly the Elasticsearch changes and the output can be duplicated. The manual configuration and post-processing of the mapping template is required.

Program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.
License

The default license of source codes provided inside this project is the Apache License v2.0. Additionally refer to individual licenses and terms of used of installed software (see licenses for Wireshark, Elastic and other).
Attribution

Special thanks to people who helped with the Wireshark development or otherwise contributed to this work:

Example pcap in ./Traces subfolder was downloaded from https://wiki.wireshark.org/SampleCaptures

Created by Martin Kacer

Copyright 2021 H21 lab, All right reserved, https://www.h21lab.com

Download tsharkVM